Mold Prevention Tips

Jun 21, 2018 by

Mold Prevention Tips

Control dampness – Moisture is the key ingredient for mold growth. Cleaning and keeping the area dry will help prevent mold from regrowing. If conditions aren’t improved, mold can regrow in as little as twenty-four hours after the area was cleaned. Keep the humidity level in your home between 40% and 60%. Use an air conditioner or a dehumidifier during humid months and in damp spaces, like basements.

Image: Moldy basement wall due to leaky pipe.

Reduce indoor humidity (to 30-60% ) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dish-washing, and cleaning.

Humidity levels should stay between fifteen percent (15%) and below forty percent (40%) during the heating season, depending on the outdoor temperature.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow. It is important to dry water damaged areas and items within 24-48 hours to prevent mold growth.

Add mold inhibitors for mold prevention to paints before painting.

Clean bathrooms with mold-killing products.

Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.

Dead mold can continue to cause allergic reactions in some people so it is important that the mold is properly managed, neutralized and also removed.

To learn more about preventing mold in your home, see the Environmental Protection Agency’s publications about mold at
https://www.epa.gov/mold/

Next : How to Avoid Sick-House Syndrome

read more

How to Find Indoor Mold

Jun 18, 2018 by

How to Find Indoor Mold

Indoor Molds can be found just about anywhere, but most often they are found indoors on or around plumbing fixtures like sinks, tubs, toilets, showers, air-conditioning systems and water-heaters. It is also quite commonly found near points such as roof leaks, improperly sealed windows, foundation slab cracks, unsealed concrete foundations, cracks in siding and plumbing leaks. It can also be found, as in the picture at the left, behind wallboard or flooring, especially in humid climates or when insulation is lacking.

Image: A lot of mold was hidden behind these sheetrock panels, invisibly but negatively affecting the health of everyone living there.

Checking for Hidden Mold

Carpeting that has been water damage or is exposed to high levels of humidity is prone to mold growth. You can detect mold by lifting a small section of the carpeting away from the floor and looking for.

Get down to floor level – look under bathroom and kitchen cabinets in spaces that are not easily seen.

Open up wall cavities in the kitchen and bathroom to check for mold growth.

Air conditioners and furnaces need to be thoroughly inspected for stagnant water and serviced regularly. Furnace duct systems should also be thoroughly cleaned regularly.

Mold colors may be white, gray, black, brown, yellow or greenish, or a combination of these. Colonies of mold may appear cottony, velvety, granular, leathery and glassy.

WHERE TO LOOK FOR MOLD

Around and under plumbing fixtures:
sinks
tubs
toilets
showers
air-conditioners
heating systems
water-heaters

Places leaks from outside are likely:
uninsulated outside walls
improperly sealed windows
cracks in siding
roof eaves
concrete slab cracks
unsealed building foundations

Q. If you do have mold, do you need to call a professional?

A. Not necessarily, it depends on the type(s) of mold and how much has grown. If you have less than 10 square feet of molds that are strictly a Type I Allergen these may be usually be cleaned up and kept at bay using a soapy or 25% bleach and water solution. If, however, the mold is Toxic, the services of a professional remediation company should be acquired.

Next : How Mold Gets There

read more

How Mold Gets There

Jun 18, 2018 by

How Mold Gets There

Mold is an necessary part of our ecosystem. It aids the decomposition of many organic substances necessary to plant, animal and human life. Molds multiply by producing spores which then circulate in the air. When the spore finds a moist surface it sticks to it and begins to grow into mold. Indoors, those airborne mold spores can cause serious health problems for people.

Image: Mold can hide in your home.

Mold spores can enter a household through open doorways, windows, heating systems, ventilation and air conditioning units. They attach themselves to your clothing and can even be brought in by pets. When they find the right conditions they grow and contaminate the air in your home.

Mold requires just two things for life and growth: there must be a source of water and a surface to which it can cling. Mold can be found just about anywhere, but indoors it is most often found on or around plumbing fixtures like sinks, tubs, toilets, showers, air-conditioning systems and water-heaters.

Many common building materials such as drywall, wood, carpets, and carpet padding are suitable surfaces for mold growth, and mold is often found near points where water can collect, such as roof leaks, improperly sealed windows, foundation slab cracks, unsealed concrete foundations, cracks in siding and plumbing leaks. Beyond leaks and floods, with normal life moisture collects in our homes from showering and cooking, damp basement floors, even just from breathing.

Many experts agree that mold at least in some form is pretty much everywhere, but it is never healthy to live with mold. Current thinking is that mold-related health problems are related not only to the amount and types of mold but also the length of mold exposure.

If you have a moist basement, then you know you have mold. If you smell a moldy odor, then you know you have mold! The odor of mold indicates there are thousands of live mold spores floating in the air. These spores may be breathed in and cause illness, or aggravate pre-existing respiratory conditions.

No matter what type of mold you have, it is unhealthy and you need to get rid of it. The next page will help you find it.

Mold is an necessary part of our ecosystem. It aids the decomposition of many organic substances necessary to plant, animal and human life. Molds multiply by producing spores which then circulate in the air. When the spore finds a moist surface it sticks to it and begins to grow into mold. Indoors, those airborne mold spores can cause serious health problems for people.

Mold spores can enter a household through open doorways, windows, heating systems, ventilation and air conditioning units. They attach themselves to your clothing and can even be brought in by pets. When they find the right conditions they grow and contaminate the air in your home.

Mold requires just two things for life and growth: there must be a source of water and a surface to which it can cling. Mold can be found just about anywhere, but indoors it is most often found on or around plumbing fixtures like sinks, tubs, toilets, showers, air-conditioning systems and water-heaters.

Many common building materials such as drywall, wood, carpets, and carpet padding are suitable surfaces for mold growth, and mold is often found near points where water can collect, such as roof leaks, improperly sealed windows, foundation slab cracks, unsealed concrete foundations, cracks in siding and plumbing leaks. Beyond leaks and floods, with normal life moisture collects in our homes from showering and cooking, damp basement floors, even just from breathing.

Many experts agree that mold at least in some form is pretty much everywhere, but it is never healthy to live with mold. Current thinking is that mold-related health problems are related not only to the amount and types of mold but also the length of mold exposure.

If you have a moist basement, then you know you have mold. If you smell a moldy odor, then you know you have mold! The odor of mold indicates there are thousands of live mold spores floating in the air. These spores may be breathed in and cause illness, or aggravate pre-existing respiratory conditions.

No matter what type of mold you have, it is unhealthy and you need to get rid of it. The next page will help you find it.

Next : Types of Mold and the Harm They Cause

read more

Types of Molds and Harm They Cause

Jun 18, 2018 by

Types of Molds and Harm They Cause

There are over 100,000 mold species, some more harmful than others. Mold spores are less than 4 microns in size. They are so small that as many as 250,000 spores can fit onto the head of a pin. If mold is growing in your home, in one minute your lungs can breathe in over 700,000 of these spores!

Mold Growth

Mold infestation may be obvious, or it can be hidden in places like behind walls and underneath appliances or carpet pads. Family members often become sick from exposure to mold spores before a mold problem is even suspected.

COMMON HOUSEHOLD MOLDS

Cladosporium (Hormodendrum sp.)

This is the most commonly identified outdoor fungus. It is a common allergen. Indoor Cladosporium sp. may be different than the species identified outdoors. It is commonly found on the surface of fiberglass duct liner in the interior of supply ducts. It can cause mycosis. A common cause of extrinsic asthma (immediate-type hypersensitivity: type I), acute symptoms include edema and bronchiospasms. Chronic cases may develop pulmonary emphysema.

Penicillium

Identification to species is difficult. Often found in aerosol samples, and commonly found in soil, food, cellulose, and grains, as well as paint and compost piles. It may cause hypersensitivity pneumonitis and allergic alveolitis in susceptible individuals. It is reported to be allergenic to the skin. It is commonly found in carpet, wallpaper, and in interior fiberglass duct insulation. Some species can produce mycotoxins. A common cause of extrinsic asthma. Acute symptoms include edema and bronchiospasms, chronic cases may develop pulmonary emphysema.

Aspergillus

A genus of fungi containing approximately 150 recognized species. Members of this genus have been recovered from a variety of habitats, some species are parasitic on insects, plants and animals, including man. Various Aspergillus species are a common cause of extrinsic asthma. Acute symptoms include edema and bronchiospasms, and a variety of opportunistic infections of the ears and eyes. Chronic cases may develop pulmonary emphysema, and severe pulmonary infections may also occur. Many species produce mycotoxins which may be associated with disease in humans and other animals. Toxin production is dependent on the species or a strain within a species and on the food source for the fungus. Some of these toxins have been found to be carcinogenic in animal species, and several toxins are considered potential human carcinogens.

Alternaria

Alternaria is very widespread and common. It is often found in carpets, textiles, and on horizontal surfaces in building interiors, and is common on window frames. The species Alternaria alternata is capable of producing tenuazonic acid and other toxic metabolites which may be associated with disease in humans or animals. It has been associated with hypersensitivity pneumoniti, sinusitis, deratomycosis, onychomycosis, subcutaneous phaeohyphomycosis, and invasive infection. Common cause of extrinsic asthma. Acute symptoms include edema and bronchiospasms, and chronic cases may develop pulmonary emphysema.

Mucor

Often found in soil, dead plant material, horse dung, fruits, and fruit juice; it is also found in leather, meat, dairy products, animal hair, and jute. May be allergenic. May cause mucorosis in immune compromised individuals. The sites of infection are the lung, nasal sinus, brain, eye, and skin. Infection may have multiple sites.

TOXIC MOLDS

There are two types of black mold that are normally less common but are considered very serious health hazards. Molds that are capable of generating toxins (called “toxigenic mold”) do not always produce them in every situation. Scientists believe that certain very specific conditions must be present for a toxigenic mold to actually produce toxins, such as the right combination of temperature, moisture, type of material the mold is growing on and, perhaps, competition from other microorganisms.

Stachybotrys

Stachybotrys chartarum is a fungus that has become well known as a mycotoxin producer that can cause animal and human mycotoxicosis. Evidence has accumulated showing this fungus as a serious problem in homes and buildings and one of the causes of the “sick building syndrome.”

This is one of many types of black mold that may grow on water-damaged building materials. This mold requires a lot of water or moisture to grow, and it only grows on materials with high fiber and low nitrogen content, such as wallpaper and the paper covering of wallboard (sheetrock), wood , or jute such as is frequently used for the backing of older carpets. Areas with relative humidity above 55% and are subject to temperature fluctuations are ideal for toxin production. This mold does not grow on shower tile or plastic. In the outdoor environment it is found in soil, rotting hay and leaf debris.

This mold, among others, may produce mycotoxins – chemicals that discourage growth of other microorganisms and that may also cause health problems in people. In recent years toxic molds have been front page stories in newspapers and on television shows all over the world. The fungus has led to multi-million dollar litigations and caused serious problems for schools, homeowners and building managers who have had to deal with the consequences of this problem.

Individuals with chronic exposure to the toxin produced by this fungus reported cold and flu symptoms, sore throats, diarrhea, headaches, fatigue, dermatitis, intermittent local hair loss, and generalized malaise. The toxins produced by this fungus will suppress the immune system affecting the lymphoid tissue and the bone marrow. Animals injected with the toxin from this fungus exhibited the following symptoms: necrosis and hemorrhage within the brain, thymus, spleen, intestine, lung, heart, lymph node, liver, and kidney. The mycotoxin is also reported to be a liver and kidney carcinogen. Illnesses caused by absorption of the toxin in the human lung are known as pneumomycosis.

Memnoniella

Memnoniella echinata is particularly toxic and irritating. It’s considered a member of the Stachybotrys family but unlike Stachybotrys chartarum, a sticky spore that tends to stay in its place, M. echinata is easily airborne and is often found in the air when it’s growing in the building. It’s actually more of a problem than its famous brother, Stachybotrys.

Toxic mold such as Stachybotrys and Memnoniella need water-soaked wood, paper, and cotton products to grow.

These mold types may appear slimy when wet – with white edges. When dry they are powdery, and hence can easily become airborne. The presence of black mold does not necessarily mean Stachybotrys mold is present, but some experts believe that from thirty to fifty percent of all homes and buildings may have some level of Stachybotrys infestation, even without flooding and other catastrophic problems. They are Serious problems in areas where homes have been flooded, and particularly in the warm southern states after the hurricanes and other summer storms.

Dr. Eckardt Johanning, an environmental health specialist at New York’s Mount Sinai Medical Center, has found that black mold toxins can cause mood changes, memory loss, and immune dysfunction, besides sore throats, headaches, upper and lower respiratory ailments, dermatitis, eye irritation and general tiredness. In 1999, the Kansas City Star quoted Susan Flappan saying, “I think it’s a missing link to a lot of questions we’ve had. We’ve had patients go from doctor to doctor without any explanation of what is wrong. Once they get rid of the Stachybotrys problem, their life gets better.”

Though scientists don’t understand all the effects of black mold, Sidney Efross of the EPA in San Francisco says, “There’s probably nothing we can call a safe level” of Stachybotrys.

You cannot determine the mold genera and species just by looking at it on the wall or even with a do-it-yourself mold test kit. For small mold problems, use bleach, soap and water instead. For larger problems hire an expert to survey your home, or send your own mold sample to a competent testing laboratory. The services of an experienced mycologist or aerobiologist are necessary to know what you’ve got.

If you suspect that you may be dealing with a toxic mold you should vacate the premises and have a professionals remove the mold before anyone comes back into the house. You can get quite ill yourself if you inhale a large quantity of the fungal dust or get it on your skin.

Next: Who Is Most Vulnerable to Illness from Molds

read more